Audio / Video Cables & Adapters › IEC › Adapter › digital cable

IEC BNCM-F100F BNC Male to F Type Female

Manufacturer part number: BNCM-F100F Adapter adapts a BNC on a panel to a different connector on the end of a cable will not change impedance. Cable must have impedance required by equipment. Full description: Weight0.03 lbsConnector N-Type Female... more

IEC BNCF-RCAF BNC Adapter BNC Female to - RCA Female

Manufacturer part number: BNCF-RCAF Adapter adapts a BNC on the end of a cable to a different connector on the panel will not change impedance. Cable must have impedance required by equipment. Full description: Weight0.02 lbsConnector F100 Male N-Type... more

IEC BNCF-UHFM BNC Female to UHF Male Adapter

Manufacturer part number: BNCF-UHFM Adapter adapts a BNC on the end of a cable to a different connector on the panel will not change impedance. Cable must have impedance required by equipment. Full description: Weight0.02 lbsConnector F100 Male N-Type... more

IEC M5151 DMS59 to VGA x 2 Y Adapter

This cable works with DMS59 Video ports on cards like ATI NVIDIA Radeon PNY and Matrox. Some Dell HP and Sun computers are equipped with these cards. more

IEC M2455 USB Adapter A Type Jack to B Type Plug

Manufacturer part number: M2455 USB Notes: •USB peripherals can connect either to a computer s port or to a hub. •If the computer doesn t have enough ports for all the peripherals a hub is necessary. •Maximum length on individual cables is 5... more

IEC M2451 USB Adapter A Type Jack to A Type Jack

Manufacturer part number: M2451 USB Notes: •USB peripherals can connect either to a computer s port or to a hub. •If the computer doesn t have enough ports for all the peripherals a hub is necessary. •Maximum length on individual cables is 5... more

IEC L1060A 5.25 inch 4 Pin to Right Angle SATA 15 Pin Power adapter

Manufacturer part number: L1060A 90 Degree connector has the UP exit. For a Data cable with same UP exit see our (M12433-1.5 is 18 inches). Full description: Weight0.05 lbs more

IEC M2456 USB Adapter A Type Plug to B Type Jack

Manufacturer part number: M2456 USB Notes: •USB peripherals can connect either to a computer s port or to a hub. •If the computer doesn t have enough ports for all the peripherals a hub is necessary. •Maximum length on individual cables is 5... more

IEC M2453 USB Adapter A Type Plug to A Type Plug

Manufacturer part number: M2453 USB Notes: •USB peripherals can connect either to a computer s port or to a hub. •If the computer doesn t have enough ports for all the peripherals a hub is necessary. •Maximum length on individual cables is 5... more

IEC M2461 USB Adapter B Type Jack to B Type Jack

Manufacturer part number: M2461 USB Notes: •USB peripherals can connect either to a computer s port or to a hub. •If the computer doesn t have enough ports for all the peripherals a hub is necessary. •Maximum length on individual cables is 5... more

IEC M2457 USB Adapter A Type Jack to B Type Jack

Manufacturer part number: M2457 USB Notes: •USB peripherals can connect either to a computer s port or to a hub. •If the computer doesn t have enough ports for all the peripherals a hub is necessary. •Maximum length on individual cables is 5... more

IEC M2410R USB Micro 5 pin OTG (On The Go) config to Type A Jack Adapter 90 degree on micro

Manufacturer part number: M2410R OTG (On The Go) adapter allows you to connect USB accessories such as flash drives keyboards mouse and media readers to your smartphone or similar device. With this adapter cable you can get the most out of your... more

IEC M5147 DVI-A (or DVI-I) Male to DH15F (VGA) Analog Adapter

Manufacturer part number: M5147 VGA is Analog only this adapter will only work to DVI-A or DVI-I ports and won t work to DVI-D. For DVI-D a DVI to VGA converter would be needed instead of this adapter. DVI Notes:Because the Digital signal of DVI is low... more