Home Hardware › Metric › quantum 1 1 4inch x

M10-1.50 x 140mm Hex Head Cap Screws Steel Metric Class 10.9 Zinc Plating (Quantity: 50 pcs) - Coarse Thread Metric Partially Threaded Length: 140mm Metric Thread Size: M10 Metric

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

Socket Head Cap Screws DIN 912 | Alloy Steel | Metric Class 12.9 | Black Oxide | Thread Diameter: M36-4.00 x Length: 360mm (Carton Size: 1) Coarse Thread | Partially Threaded

Thread Size: M36 x Thread Pitch: 4.00 Length of Screw: 360mm Measured from under head to tip of screw Material: Metric Class 12.9 Alloy Steel with a Thermal Black Oxide Finish more

M10-1.50 x 100mm Hex Head Cap Screws Steel Metric Class 8.8 Zinc Plating (Quantity: 50 pcs) - Coarse Thread Metric Partially Threaded Length: 100mm Metric Thread Size: M10 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

Socket Set Screw Cup Point DIN 916 M8-1.25 x 16mm Alloy Steel Metric Class 14.9 - 45H Zinc Hex Socket (Quantity: 100)

Thread: Coarse / Thread / Metric Class 14.9 - 45H / Zinc Recommended Hex Socket Allen Key Wrench: 4 (Metric) Thread Diameter-Pitch: M8-1.25 Length: 16mm Recommended Hex Socket (Allen Wrench) Size: 4 (Metric) more

M6-1.0 x 60mm Hex Head Cap Screws Steel Metric Class 8.8 Plain Finish (Quantity: 200 pcs) - Coarse Thread Metric Fully Threaded 60mm Metric Thread M6 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

Socket Set Screw Cone Point DIN 914 M8-1.25 x 22mm Alloy Steel Metric Class 14.9 - 45H Black Oxide Hex Socket (Quantity: 3000)

Designed for Permanent Setting on soft or hardened shafts Deep penetration gives this style of screw the highest torsional and axial holding power Can be used as a hangar or pivot. For shafts of Rockwell hardness C15 or more spot point half its depth... more

Socket Flat Countersunk Head Cap Screw M6-1.0 x 40mm Alloy Steel Metric Class 12.9 Zinc Hex Socket (Quantity: 400)

Thread: Coarse / Partial Thread / Metric Class 12.9 / Zinc Recommended Hex Socket Allen Key Wrench: 4 more

M6-1.0 x 16mm Hex Head Cap Screws Steel Metric Class 10.9 Zinc Yellow Plating (Quantity: 100 pcs) - Coarse Thread Metric Fully Threaded Length: 16mm Metric Thread Size: M6 Metric

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

M8-1.25 x 90mm Hex Head Cap Screws Steel Metric Class 10.9 Zinc Yellow Plating (Quantity: 450 pcs) - Coarse Thread Metric Partially Threaded 90mm Metric Thread M8 Metric

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

12pcs M8 x 1.25mm Pitch Metric Thread Carbon Steel Zinc Plated Left Hand Hex Nut

Thread pitch: 1.25mm Made of carbon steel with zinc plated provide strength and good corrosion resistance. Used for many applications arround the home farm business automotives and in industry. more

M20-1.5 x 90mm Hex Head Cap Screws Steel Metric Class 10.9 Plain Finish (Quantity: 65 pcs) - Extra Fine Thread Metric Partially Threaded Length: 90mm Metric Thread Size: M20 Metric

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

10mm-1.25 x 40mm Zinc Plated Class 8.8 Steel Fine Thread Metric JIS Hex Cap Screws

Diameter: 10mm Length: 40mm Material: Steel Finish: Zinc Head Style: Hex (#14 Wrench) Thread Size: 1.25mm (Fine) Thread Length: 40mm Hardness: Class 8.8 Style: JIS Type: Cap Screw A hex cap screw has a hexagonal head designed to be driven by a wrench. more

M12-1.75 x 100mm Hex Head Cap Screws Steel Metric Class 8.8 Zinc Plating (Quantity: 175 pcs) - Coarse Thread Metric Partially Threaded Length: 100mm Metric Thread Size: M12 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

M10-1.50 x 180mm Hex Head Cap Screws Steel Metric Class 8.8 Plain Finish (Quantity: 25 pcs) - Coarse Thread Metric Partially Threaded Length: 180mm Metric Thread Size: M10 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

M6-1.0 x 35mm Hex Head Cap Screws Stainless Steel A4 Plain Finish (Quantity: 100 pcs) - Coarse Thread Metric Partially Threaded 35mm Metric Thread M6 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from stainless steel. Threaded shank does not extend completely to the head. more

Socket Low Head Cap Screw DIN 912 M6-1.0 x 10mm Alloy Steel Metric Class 10.9 (SIP 147) Black Oxide Hex Socket (Quantity: 100)

Thread: Coarse / Full Thread / Metric Class 10.9 (SIP 147) / Black Oxide Recommended Hex Socket Allen Key Wrench: 4 more

Socket Head Cap Screws DIN 912 | Alloy Steel | Metric Class 12.9 | Black Oxide | Thread Diameter: M8-1.00 x Length: 30mm (Carton Size: 100) Fine Thread | Fully Threaded

Thread Size: M8 x Thread Pitch: 1.00 Length of Screw: 30mm Measured from under head to tip of screw Material: Metric Class 12.9 Alloy Steel with a Thermal Black Oxide Finish more

Socket Set Screw Cup Point DIN 916 M6-1.0 x 8mm Alloy Steel Metric Class 14.9 - 45H Black Oxide Hex Socket (Quantity: 5000)

Thread: Coarse / Thread / Metric Class 14.9 - 45H / Black Oxide Recommended Hex Socket Allen Key Wrench: 3 (Metric) Thread Diameter-Pitch: M6-1.0 Length: 8mm Recommended Hex Socket (Allen Wrench) Size: 3 (Metric) more

Socket Flat Countersunk Head Cap Screw DIN 7991 M10-1.5 x 110mm Alloy Steel Metric Class 12.9 Black Oxide Hex Socket (Quantity: 150)

Thread: Coarse / Partial Thread / Metric Class 12.9 / Black Oxide Recommended Hex Socket Allen Key Wrench: 6 more

Socket Flat Countersunk Head Cap Screw M8-1.25 x 50mm Alloy Steel Metric Class 12.9 Zinc Hex Socket (Quantity: 500)

Thread: Coarse / Partial Thread / Metric Class 12.9 / Zinc Recommended Hex Socket Allen Key Wrench: 5 more

M12-1.75 x 45mm Hex Head Cap Screws Steel Metric Class 8.8 Plain Finish (Quantity: 50 pcs) - Coarse Thread Metric Fully Threaded Length: 45mm Metric Thread Size: M12 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

M12-1.75 x 20mm Hex Head Cap Screws Steel Metric Class 10.9 Zinc Plating (Quantity: 600 pcs) - Coarse Thread Metric Fully Threaded 20mm Metric Thread M12 Metric

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

M8-1.25 x 75mm Hex Head Cap Screws Steel Metric Class 10.9 Zinc Plating (Quantity: 100 pcs) - Coarse Thread Metric Fully Threaded Length: 75mm Metric Thread Size: M8 Metric

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

M3.5-1.57 x 7mm Metric Phillips Pan Head Pt Alternative 30 Degree Full Thread A2 Stainless Steel (Quantity: 5000)

M3.5-1.57 x 7mm Metric Phillips Pan Head Pt Alternative 30 Degree Full Thread A2 Stainless Steel (Quantity: 5000) more

M6-1.0 x 30mm Din 7500C Metric Type Z Pan Thread Roll Screw Full Thd 18 8 Stain Steel Pass/Wax (Quantity: 350)

M6-1.0 x 30mm Din 7500C Metric Type Z Pan Thread Roll Screw Full Thd 18 8 Stain Steel Pass/Wax (Quantity: 350) more

M6-1.0 x 35mm Hex Head Cap Screws Steel Metric Class 8.8 Plain Finish (Quantity: 100 pcs) - Coarse Thread Metric Partially Threaded Length: 35mm Metric Thread Size: M6 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

M8-1.25 x 65mm Hex Head Cap Screws Stainless Steel A4 Plain Finish (Quantity: 50 pcs) - Coarse Thread Metric Partially Threaded Length: 65mm Metric Thread Size: M8 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from stainless steel. Threaded shank does not extend completely to the head. more

Socket Head Cap Screws DIN 912 | Alloy Steel | Metric Class 12.9 | Black Oxide | Thread Diameter: M24-3.00 x Length: 320mm (Carton Size: 1) Coarse Thread | Partially Threaded

Thread Size: M24 x Thread Pitch: 3.00 Length of Screw: 320mm Measured from under head to tip of screw Material: Metric Class 12.9 Alloy Steel with a Thermal Black Oxide Finish more

Socket Set Screw Knurled Cup Point M6-1.0 x 30mm Alloy Steel Metric Class 14.9 - 45H Black Oxide Hex Socket Drive (Quantity: 3000)

Thread: Coarse / Thread / Metric Class 14.9 - 45H / Black Oxide Recommended Hex Socket Allen Key Wrench: 3 (Metric) Thread Diameter-Pitch: M6-1.0 Length: 30mm Recommended Hex Socket (Allen Wrench) Size: 3 (Metric) more

M8-1.25 x 65mm Hex Head Cap Screws Steel Metric Class 8.8 Zinc Plating (Quantity: 600 pcs) - Coarse Thread Metric Partially Threaded Length: 65mm Metric Thread Size: M8 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

M16-1.5 x 70mm Hex Head Cap Screws Steel Metric Class 10.9 Plain Finish (Quantity: 125 pcs) - Fine Thread Metric Partially Threaded 70mm Metric Thread M16 Metric

An externally threaded fastener with a hexagonal head washer face beneath the head a metric thread pitch. Made from high alloy steel and heat-treated. Threaded shank does not extend completely to the head more

Socket Set Screw Cup Point DIN 916 M12-1.75 x 70mm Alloy Steel Metric Class 14.9 - 45H Black Oxide Hex Socket (Quantity: 50)

Thread: Coarse / Thread / Metric Class 14.9 - 45H / Black Oxide Recommended Hex Socket Allen Key Wrench: 6 (Metric) Thread Diameter-Pitch: M12-1.75 Length: 70mm Recommended Hex Socket (Allen Wrench) Size: 6 (Metric) more

M12-1.5 x 35mm Hex Head Cap Screws Steel Metric Class 8.8 Plain Finish (Quantity: 50 pcs) - Fine Thread Metric Fully Threaded 35mm Metric Thread M12 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more

Socket Set Screw Cup Point DIN 916 M8-1.25 x 18mm Alloy Steel Metric Class 14.9 - 45H Black Oxide Hex Socket (Quantity: 3800)

Thread: Coarse / Thread / Metric Class 14.9 - 45H / Black Oxide Recommended Hex Socket Allen Key Wrench: 4 (Metric) Thread Diameter-Pitch: M8-1.25 Length: 18mm Recommended Hex Socket (Allen Wrench) Size: 4 (Metric) more

Socket Set Screw Knurled Cup Point M6-1.0 x 20mm Alloy Steel Metric Class 14.9 - 45H Black Oxide Hex Socket Drive (Quantity: 5000)

Thread: Coarse / Thread / Metric Class 14.9 - 45H / Black Oxide Recommended Hex Socket Allen Key Wrench: 3 (Metric) Thread Diameter-Pitch: M6-1.0 Length: 20mm Recommended Hex Socket (Allen Wrench) Size: 3 (Metric) more

M8-1.25 x 110mm Hex Head Cap Screws Stainless Steel A4 Plain Finish (Quantity: 250 pcs) - Coarse Thread Metric Partially Threaded Length: 110mm Metric Thread Size: M8 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from stainless steel. Threaded shank does not extend completely to the head. more

Socket Flat Countersunk Head Cap Screw DIN 7991 M6-1.0 x 8mm Alloy Steel Metric Class 12.9 Black Oxide Hex Socket (Quantity: 2500)

Thread: Coarse / Full Thread / Metric Class 12.9 / Black Oxide Recommended Hex Socket Allen Key Wrench: 4 more

M8-1.25 x 30mm Hex Head Cap Screws Steel Metric Class 8.8 Plain Finish (Quantity: 1150 pcs) - Coarse Thread Metric Fully Threaded Length: 30mm Metric Thread Size: M8 Metric

An externally threaded fastener with a hexagonal head washer-face beneath the head a metric thread pitch made from medium carbon steel and heat treated. Threaded shank does not extend completely to the head. more