Power Tools › Irwin › avery 7278260523 3 1 2

Irwin Tools UniBit 3/16-Inch to 1/2-Inch Step-Drill Bit 1/4-Inch Shank 10232

This IRWIN Unibit #2 High-Speed Steel Fractional Self-Starting Step Drill Bit features a single-flute cutting edge for greater control through each of its 6 steps. The sharp SpeedPoint tip penetrates fast and helps prevent walking while the hex shank... more

IRWIN UNIBIT 2 Step Drill Bit, 6 Hole Sizes, 3/16 in to 1/2 in, 1/16 Step

Step Drill Bit, High Speed Steel, Black Oxide, 3/16 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 1/4 in Overall Length, Maximum Drilling Depth 5/16 in more

Irwin 5/8 to 1-3/4 in. X 5-1/2 in. L High Speed Steel Adjustable Wood Boring Bit 1 pc

IRWIN Drill Press Adjustable Wood Bits features adjustable cutting blade bores a variety of hole sizes more

IRWIN 44801 Adjustable Spade Bit

Adjustable Spade Drill Bit, 1 3/4 in Drill Bit Size, Straight, High Speed Steel, Shank Diameter 1/4 in, Overall Length 5 1/2 in, Bright (Uncoated), Maximum Drilling Depth 4 in more

Irwin 326002 Rotary Percussion Masonry Drill Bit 3/16 in Dia x 3-1/2 in OAL

Product description Rotary Percussion - Straight Shank Fits all hammer drills with 3-jaw or Jacobs chuck Chrome vanadium shaft through-hardened to 50-53HrC Patented flute geometry removes dust from the hole quicker for fast drilling and long life Up to... more

Irwin Hanson HAN90188 High Speed Steel 1/2-Inch Reduced Shank 6-Inch Long 1-3/8-Inch Silver and Deming Drill

High Speed Steel 1/2 Reduced Shank 6 Long 1-3/8 Silver and Deming Drill Bit Features and Benefits: ? Bit is constructed of M-7 high speed steel for high resistance to abrasion during tough drilling applications ? Three-flatted shank design provides... more

Irwin 42924 1-1/2-Inch by 3/8-Inch Shank Forstner Bit

1-1/2 Wood Boring Forstner Bit Brad Point Starts The Bit Cleanly Even On Uneven Surfaces Bores Precision Holes At Any Angle Reduced Shank .375 Round Shank Fits 3/8 & Larger Drill 3-1/2 Overall Length. Forstner Bit measures 3-1/2 inches in overall... more

IRWIN 1837629 - T30 x 3-1/2 Torx Impact Power Bit

IRWIN 1837629 - T30 x 3-1/2 Torx Impact Power Bit more

Irwin 1 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3-Flat Secure-Grip hammer/drill bits provide superiority in regards to quality performance and longevity of life. The 3-Flat Secure-Grip shank is designed to fit in all 1/2 inch 3-jaw hammer/drill chucks and reduces the possibility of the bit spinning... more

Irwin Speedbor 1-1/2 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin Tools 3046008 Speedbor Max Self Feed Wood Drill Bit 1-1/2 Each

Ideal for pipe & conduit systems. 3 times the cutting area & edges of standard self feed bits. For drilling large diameter holes in wood aggressive screw pitch. Precision milled shank eliminates run out & wobble. Forged in 1 piece from high carbon... more

Irwin 42922 1-3/8-Inch by 3/8-Inch Shank Forstner Bit

1-3/8 Wood Boring Forstner Bit Brad Point Starts The Bit Cleanly Even On Uneven Surfaces Bores Precision Holes At Any Angle Reduced Shank .375 Round Shank Fits 3/8 & Larger Drill 3-1/2 Overall Length. Forstner Bit measures 3-1/2 inches in overall... more

Irwin 5/8 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53 HRC shot-peened double-tempered finish flute geometry removes dust from the hole quicker copper braze material gives high heat... more

Irwin Tools 10231 Unibit 13-Hole High Speed Step Drill 1/8 To 1/2

#1 Unibit; 1/8 To 1/2 Step Drill; 13 Hole Sizes From 1/8 To 1/2 In 1/32 Increments; Maximum Material Thickness 1/8 ; 3 Flatted Shank; Shank Size 1/4 ; Single Fluted Cutting Edge Assures True Round Holes & Allows Greater Control; Carded. more

IRWIN UNIBIT 1 Step Drill Bit, 13 Hole Sizes, 1/8 in to 1/2 in, 1/32 in Step

Step Drill Bit, High Speed Steel, Black Oxide, 1/8 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 3/16 in Overall Length, Maximum Drilling Depth 1/8 in more

Irwin Speedbor 2 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin Speedbor 2-9/16 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin 3041001 Speedbor Max Wood Boring Bit 1/2 x6

Cutting spurs have 3 cutting edges for added durability. Grooved hex shank prevents slipping in drill chuck or bit extension. Fits all standard 1/4 quick change chucks. more

IRWIN 3041001 Woodboring Bit, 1/2 x 6 IN

Speedbor, Hybrid Drill Bit, 1/2 in, 1 3/4 in Flute Length, 6 in Overall Length, Shank Diameter 1/4 in, Carbon Steel, Maximum Drilling Depth 4 in, Bright (Uncoated) more

Irwin Industrial Tools 49906 I-100 3/8-Inch Auger Bit

#I-100 3/8 Solid Center Auger Bit 4-1/2 Twist Length 7-1/2 Overall Length Provides Extra Rigidity While Boring Wide Lands Keep The Bit Straight As It Bores Through The Hole The Flutes Are Ground Behind The Lands To Funnel The Chips To The Inside Of The... more

Hanson HS DR CD 3/8

Features and Benefits: Constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance Standard 118 degree point for use in wood metal and plastic Overall length: 3-1/8 more

Irwin Hanson HAN372818P5 Hanson 8-Inch Metal Cutting Reciprocating Bi-Metal Blades with 18 TPI .035-Inch Thickness (Pack of 5)

Metal Cutting Reciprocating Bi-Metal Blades Features: ? Cuts all metals including nonferrous pipe conduit stainless steel and sheet metals ? Use with materials 1/8 - 1/2 (3.2 - 13 mm) thick ? Bi-metal construction for faster cutting and added... more

Irwin Hanson HAN394100 Power Grip Nut Buster 7-Piece Set

When you are faced with a rounded-off rusted-tight or painted-over bolt bolt extractors will break it free. Includes: 1/4 drive size: 8mm 10mm 11mm 3/16 1/4 5/16 3/8 7/16 and 1/2 . ? Designed for use with power tools ? 1/4 hex shank fits most power... more

Irwin Turbomax Multi Size Dia. x Multiple L High Speed Steel Drill Bit Set Straight Shank 15 pc.

Turbo point for no slip starting on hard materials prevents walking of drill bit. Gold oxide coating for additional corrosion resistance. Can be used for drilling in metal wood or plastic. Jobber length. Set includes: (2) 1/16 5/64 (2) 3/32 7/64 (2)... more

Vise Grip 502 3PC HSS UNIBIT SET IN KIT BAG

Features and Benefits: Non-skid self-starting tip eliminates skidding and the need for center punching Single-flute cutting edge for greater control through steps 3 flatted shank prevents slipping in drill chuck Includes: HSS #1 2 and 3 more

IRWIN 10502cb HSS Cobalt Alloy Steel Step Drill Bit Set, 3-Piece, #1, #2 & #3

Step Drill Bit Set, Cobalt Alloy Steel, Black Oxide, 1/8 in to 3/4 in Size Range, Straight with Three Flats, Number of Drill Bits 3, Shank Hex Size 1/4 in more

Irwin 49600 Drill Bit Set Steel

Brad Point Drill Bit Sets 3/16 in - 1/2 in Cut Dia. Irwin Brad Point Drill Bit Sets WARNING: Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause... more

Hanson 8PC S&D DR-8-PC SET

Features and Benefits: 8-piece 1/2 reduced shank silver & deming high speed steel drill bit set Constructed of M-7 high speed steel for high resistance to abrasion Three flatted shank design provides better chuck grip while reducing slippage Ideal for... more

IRWIN 3041020 Wood Boring Bit,1-3/8 in. dia.,3/8 Shank

Speedbor, Hybrid Drill Bit, 1 3/8 in, 2 7/8 in Flute Length, 6 in Overall Length, Shank Diameter 3/8 in, Carbon Steel, Maximum Drilling Depth 4 in, Bright (Uncoated) more

IRWIN UNIBIT 4 Unibit #4 Step Drill Bit, 12 Hole Sizes, 3/16 to 7/8 in, 1/16 in

Step Drill Bit, High Speed Steel, Black Oxide, 3/16 in to 7/8 in Size Range, Straight with Three Flats, 3/8 in Shank Diameter, 2 7/8 in Overall Length, Maximum Drilling Depth 1/8 in more

IRWIN 3041004 Woodboring Bit, 3/4 x 6 IN

Speedbor, Hybrid Drill Bit, 3/4 in, 2 3/8 in Flute Length, 6 in Overall Length, Shank Diameter 1/4 in, Carbon Steel, Maximum Drilling Depth 4 in, Bright (Uncoated) more

IRWIN 49912 Auger Bits

Spur Auger, Auger Bits, 3/4 in, 7 1/2 in Overall Length, Hex, Bright (Uncoated), Shank Diameter 3/4 in, Shank Hex Size 5/16 in, Maximum Drilling Depth 4 1/2 in more

IRWIN 3094001 Extractor Set,5 PC,w/Bolt Extractors

Screw Extractor Set, Extractor Type Reverse Spiral Flute Deep Well Bolt Extractor, Number of Pieces 5, For Bolt Size 1/2 in, 3/8 in, 5/8 in, 7/16 in, 9/16 in, Material - Machining Carbon Steel, Container Type Case, Drive Size 3/8 in, Drive Type Square more

IRWIN 45002 Adjustable Spade Bit

Adjustable Spade Drill Bit, 3 in Drill Bit Size, Straight, High Speed Steel, Shank Diameter 11/32 in, Overall Length 6 1/2 in, Bright (Uncoated), Maximum Drilling Depth 5 in more

Irwin 81105 High Speed Steel Wire Gauge Drill Bit 2-1/2 x 3-3/4

Irwin Wire Gauge Drill Bit - Used where more precisely sized holes are required. Drills exact hole size - ideal for tapping. Bit is constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance. For use in... more

Irwin 1-3/8 in. X 2-3/8 in. L High Speed Steel Wire Gauge Bit 1 pc

The Irwin tools for basic drilling applications in more

Irwin 2-3/16 in. X 3-3/8 in. L High Speed Steel Wire Gauge Bit 1 pc

The Irwin tools for basic drilling applications in more

IRWIN 15102 HSS Step Drill Bit 6 Sizes, 3/16-1/2"

Step Drill Bit, High Speed Steel, Black Oxide, 3/16 in to 1/2 in Size Range, Straight with Three Flats, 1/4 in Shank Hex Size, 3/8 in Shank Diameter, 2 11/16 in, 2 7/8 in, 3 3/16 in, 3 1/4 in Overall Length, Maximum Drilling Depth 1/8 in, 5/16 in more