You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
Best Seller | PRIMELINE TOOLS GD 52212 Steel, Heavy Duty Short Stem Roller (2 Pack) This is a heavy-duty steel garage door roller with steel inner race. It features 10 ball bearings and a short stem. Same as the Prime-Line GD 52111 but this has a shorter stem. •Used to replace roller bearings on existing sectional garage doors •Short... ... more | go to store |
This is a plain back tandem roller assembly used by Smith and Carry and a variety of other sliding patio door manufacturers of metal framed patio doors. It has an in-line tandem inner housing with 1-1/2 in. concave steel ball bearing rollers set in a... ... more | go to store |
This roller is constructed from steel. It comes affixed to an adjustable steel housing. Used by Air Control, Howmet, Krestmark, and a variety of other sliding glass door manufacturers. | Prime-Line Sliding Door Roller Assembly w/ 1-1/2 in. Steel Ball... ... more | go to store |
This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... ... more | go to store |
This is a plain back tandem roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable. Used by a variety of manufacturers of vinyl patio doors. The housing is 3/4 in. wide and 1 in. tall... ... more | go to store |
This is a plain back tandem plain back roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable. Used by Keller as well as a variety of other manufacturers, primarily on vinyl patio... ... more | go to store |
This is a unique, one of a kind, trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two... ... more | go to store |
This is a plain back tandem roller assembly with two 1-1/4 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable and is used by a variety of manufacturers of vinyl, aluminum or wood doors. The housing is a plain... ... more | go to store |
This is a 1-1/2 in. diameter concave Precision steel ball bearing roller replacement, used on several patio and wardrobe door roller assemblies. Precision rollers are made of hardened steel and have a sealed ball bearing race. It has a 7/32 in. built... ... more | go to store |
This sliding screen door roller assembly fits onto the spring-loaded arm of a Columbia corner insert. The roller housing is stamped steel with a 1 in. steel ball bearing roller installed. These rollers are a replacement roller for the discontinued... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 5/8 in. wide, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball-bearing roller. It has a plain back housing that is 3/4 in. wide and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 23/32 in. wide with a 3/4 in. dimple width and 1-3/16 in. tall. It is rear adjusting with a threaded... ... more | go to store |
This is a Plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 27/32 in. flare, 1-1/8 in. tall and 2-7/16 in. long. It is rear adjusting with a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 21/32 in. wide with a 3/4 in. flare and 1-1/8 in. tall. It is rear adjusting with a threaded mounting... ... more | go to store |
This is a unique back tandem roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The housing is 13/16 in. wide with a 1-1/8 in. flare, 1-15/32 in. tall and 4-1/2 in. long. It has two machine threaded mounting screw holes... ... more | go to store |
This is a plain back patio door roller assembly with a 1-11/16 in. concave or grooved nylon ball bearing roller used by Arcadia and a variety of other patio door manufacturers. The stamped steel housing has a unique design that is 3/4 in. wide, 1-5/16... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/2 in. tall with a flare width of 13/16 in. and features a rear adjusting with a 1/4-20... ... more | go to store |
This is a plain back tandem roller assembly used by several patio door manufacturers. It has an inner housing with tandem inline 1-1/2 in. concave (center grooved) steel ball bearing rollers set in a stamped steel housing with rear adjustment. The... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It is 3/4 in. wide with a 27/32 in. flare, 1-5/8 in. tall and 1-1/2 in. long (not including the inner roller housing). It is rear adjusting... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 7/8 in. flare, and 1-9/16 in. tall. It is rear adjusting with a 1/4-20 threaded... ... more | go to store |
This is an E-tab tandem roller assembly with two 1-1/2 in. concave steel ball-bearing rollers. As the corner screw passes through the E- tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 11/16 in. wide with... ... more | go to store |
This is a reversed F-tab tandem roller assembly. The adjustable stamped steel housing is 11/16 in. wide, 1-1/8 in. tall with a flare width of 13/16 in.. There are two 1-1/4 in. concave or grooved steel ball bearing rollers. Used by Fleetwood and a... ... more | go to store |
This is a C-tab tandem roller assembly with two 1-1/8 inch steel ball-bearing rollers. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 11/16... ... more | go to store |
This is an S-tab tandem roller assembly with two 1-1/2 in. concave nylon ball bearing rollers. When the corner screw passes through the S-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
This is a C-tab tandem roller assembly with 1-1/8 in. steel ball bearing rollers installed. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 9/16... ... more | go to store |
This is a unique housing tandem roller assembly most often found on Andersen wood patio doors as well as a variety of other manufacturers of wood patio doors. It has tandem 1-1/4 in. concave or grooved steel ball bearing rollers set in line in a... ... more | go to store |
This is a unique tandem roller assembly with two 1-1/4 in. concave steel ball-bearing rollers installed. The square-shaped housing is 11/16 in. wide, 1-1/2 in. tall, and 4-1/2 in. long. It has an end adjustment screw and two mounting tabs at each end... ... more | go to store |
This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/4 in. tall with a flare width of 13/16 in. with a rear adjusting screw. Features a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/2 in. tall with a flare width of 13/16 in. It is a rear adjusting with a 1/4-20 threaded... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
This is a plain back tandem roller assembly with two 1-1/8 in. concave steel ball bearing rollers. The stamped steel housing is adjustable and used by Milgard as well as a variety of other manufacturers. Primarily used on vinyl patio doors. The housing... ... more | go to store |
This is a U-back patio door roller assembly with a 1-1/2 in. concave (center grooved) steel ball-bearing roller. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw is tightened. The housing is... ... more | go to store |
This is a U-back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting... ... more | go to store |
Ads related to Prime-Line 1-1/4 in. Steel Ball Bearing, Plain Back Tandem Roller Single Pack in Yellow | 7.35 H x 3.75 W x 1.15 D in | Wayfair D 1917