You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
| Best Seller  | PRIMELINE TOOLS N 6534 7/8 in., Top Mount Bi-fold Tandem Roller, Offset (Single This is a top, center mounted, adjustable, tandem roller assembly. The 7/8 inch round edged or convex nylon rollers are attached to a stamped steel tandem housing and sits offset on top of a 5/16 inch threaded steel rod. The unique positioning of the... ... more
PRIMELINE TOOLS N 6534 7/8 in., Top Mount Bi-fold Tandem Roller, Offset (Single This is a top, center mounted, adjustable, tandem roller assembly. The 7/8 inch round edged or convex nylon rollers are attached to a stamped steel tandem housing and sits offset on top of a 5/16 inch threaded steel rod. The unique positioning of the... | go to store |
 | This is a unique back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a unique back housing made of extruded aluminum. The housing is 7/8 in. 1-3/16 in. tall and 2-1/16 in. long. This style of unique... ... more | go to store |
| Best Seller  | This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller used by Trimview and a variety of patio door manufacturers. It's diecast plain back housing is 11/16 in. wide, 1 in. tall and 2-5/8 in. long.... ... more | go to store |
 | Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This aluminum housing with... ... more | go to store |
 | This is a diecast unique back patio door roller assembly with a 1-1/4 in. concave steel ball-bearing roller used by a variety of patio door manufacturers. Its diecast housing is a cross between the Unique or the Plain Back styles. It is 11/16 in. wide... ... more | go to store |
 | This is a unique back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It's has a tab design on the bottom back edge that snaps the roller assembly into place on the door stile edge before being held in place by a mounting... ... more | go to store |
 | This is a unique back patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller. The stamped steel housing is 11/16 in. wide and 1-3/8 in. tall. It is rear adjusting with a set of tabs or ears that insert into slots in the door's... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 23/32 in. wide with a 3/4 in. dimple width and 1-3/16 in. tall. It is rear adjusting with a threaded... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 5/8 in. wide, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 7/8 in. flare, and 1-9/16 in. tall. It is rear adjusting with a 1/4-20 threaded... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball-bearing roller. It has a plain back housing that is 3/4 in. wide and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
 | This nylon constructed ball bearing Mirror Door Roller is housed in an adjustable steel housing. It comes plated in a gold zinc finish to help resist corrosion. This type of roller is used by Marshall brand and like styled doors. | Prime-Line Mirror... ... more | go to store |
 | This is a Plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 27/32 in. flare, 1-1/8 in. tall and 2-7/16 in. long. It is rear adjusting with a... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
 | This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved Plastic ball bearing roller. It has a plain back housing that is 5/8 in. wide and 1 in. tall with two mounting tabs/hooks on the top. It is rear adjusting with a 1/4-20... ... more | go to store |
 | This is a plain back tandem roller assembly used by Smith and Carry and a variety of other sliding patio door manufacturers of metal framed patio doors. It has an in-line tandem inner housing with 1-1/2 in. concave steel ball bearing rollers set in a... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/4 in. tall with a flare width of 13/16 in. with a rear adjusting screw. Features a... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-11/16 in. concave or grooved nylon ball bearing roller used by Arcadia and a variety of other patio door manufacturers. The stamped steel housing has a unique design that is 3/4 in. wide, 1-5/16... ... more | go to store |
 | This mirror door roller is constructed from nylon. It comes attached to an adjustable steel housing. This type of roller fits on Contractors mirror door. | Prime-Line Mirror Door Roller Assembly, 1-7/16 in. Roller, Steel Housing & Ball Bearings,... ... more | go to store |
 | This is a unique, one of a kind, trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It is 3/4 in. wide with a 27/32 in. flare, 1-5/8 in. tall and 1-1/2 in. long (not including the inner roller housing). It is rear adjusting... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 21/32 in. wide with a 3/4 in. flare and 1-1/8 in. tall. It is rear adjusting with a threaded mounting... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and... ... more | go to store |
 | This roller is constructed from steel. It comes affixed to an adjustable steel housing. Used by Air Control, Howmet, Krestmark, and a variety of other sliding glass door manufacturers. | Prime-Line Sliding Door Roller Assembly w/ 1-1/2 in. Steel Ball... ... more | go to store |
 | Features:Sliding pocket door twin wheel rollerTop mount designAdjustable steel bracketComes complete with hardware for a quick and easy installationProduct Type: Shutter/Door AccessoryFunction: Style: IndustrialFinish: SilverHand Painted: NoPrimary... ... more | go to store |
 | This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... ... more | go to store |
 | This is a unique one of a kind trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two... ... more | go to store |
 | This is a unique back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. The unique housing is 11/16 in. wide and 1-3/8 in. tall. It is rear adjusting with a set of tabs or ears that insert into slots in the door's bottom... ... more | go to store |
 | This is a diecast unique back that is used on Art Door patio doors. The 1-11/16 in. diameter by 7/16 in. wide roller is wider than the average roller. It is installed in a stamped steel bracket that is then installed onto the diecast housing. The... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other manufacturers, primarily on vinyl patio doors. The housing is... ... more | go to store |
 | This Mirror Door Roller is constructed of a steel housing and a concaved (grooved) edge, plastic wheel. This Mirror Door Roller is most commonly used on wood framed sliding mirror doors. The wheel is constructed of durable plastic which provides for a... ... more | go to store |
 | This is a plain back tandem roller assembly used by several patio door manufacturers. It has an inner housing with tandem inline 1-1/2 in. concave (center grooved) steel ball bearing rollers set in a stamped steel housing with rear adjustment. The... ... more | go to store |
 | This is an all nylon roller assembly used on Likit patio doors. The housing is nylon with a bronze bushing axle for the 1-5/16 inch nylon roller. They are NON-ADJUSTABLE. They slide into an extruded channel inside the patio door's bottom rail. Used by... ... more | go to store |
 | This Mirror Door Roller is constructed from nylon and comes affixed to a steel housing. It features an adjustable bottom mount design. This style roller is used by several mirror door manufacturers. | Prime-Line 1-1/2 in. Nylon Mirror Door Roller... ... more | go to store |
 | This Bypass Door Roller assembly is constructed from nylon. It features a ball bearing roller with an adjustable aluminum-housing bracket. Monarch door company uses this type or roller for 500 series aluminum frame doors. | Prime-Line Bypass Door... ... more | go to store |
 | This is a plastic backplate that can be inverted for self-adjusting application. For use on "hat-section" style track and rolled edge and most other center mount tracks. | Prime-Line Drawer Track Backplate, 1-1/4 in. Opening, Plastic, Purple (Single... ... more | go to store |
Ads related to Prime-Line Single 1-1/4 in. Nylon Roller Assembly, Track Cleaner, Unique Back Housing Single Pack | 5.44 H x 3.82 W x 0.88 D in | Wayfair D 1794
